How to Choose the Right Sharpener
Although almost all the sharpeners look like different color
versions of the same thing they are not the same. The shape and configuration of the blades are
designed for specific sharpening applications.
or save with the
Three Sharpener Combo
Pack
This Guide can help you choose the right sharpener for your
application.
The AccuSharp Knife & Tool Sharpener
The AccuSharp Knife & Tool
Sharpener sharpens any blade that’s beveled on both
sides... knives, (even serrated knives), cleavers, axes, machetes, and many other cutting
tools. It can be used either right or left handed and has a full length guard to protect the
fingers. The blades are made of tungsten carbide and are diamond honed to provide outstanding
durability and sharpening capability. The sharpeners will not rust and can be tossed in the
dishwasher or cleaned by hand with soap and water.
The blades are reversible so when you finally do wear them down
(mine lasted over 5 yrs) you can reverse the blades and you have new sharpening surfaces for
years more service. Replacement blades
available.
Click for detailed manufacturer's instructions and
diagrams.
The GardenSharp Sharpener sharpens blades /
tools that are beveled only one one side, such as
lawnmower blades, pruning shears (secateurs), limb loppers, hoes, shovels, scythes. . . almost
anything sharpened only on one side of the blade. All can be sharpened to a razor edge quickly
and easily with GardenSharp. The full length finger guard protects fingers while the reversible
Diamond Honed Tungsten Carbide blade puts your cutting edge in "good as new" condition. Replacement Blades available.
The GardenSharp has one blade that cuts/sharpens and one blade
that acts as a guide only, keeping the correct angle for proper sharpening. The GardenSharp
renews the single edged (beveled) blade by being run over the edge, not only cutting steel, but
also straightening the edge.
Homeowners, florists, landscapers, and gardeners
of all kinds need the GardenSharp Tool Sharpener.
Click for detailed manufacturer’s instructions and
diagrams.
The ShearSharp Sharpener is designed to sharpen
general purpose scissors, hedge clippers, tin snips,
etc. It is engineered so that it planes the flat edges of the blades. When used the two
edges that mean become dull when they roll. By planing the two edges flat you achieve two crisp
edges again. The full length finger guard protects
your fingers and is handy for use by left or right handed use.
-
Takes the dread out of sharpening general purpose scissors,
etc
-
Reversible Diamond Honed Tungsten Carbide Sharpening
Blades
-
Manufacturer's Lifetime Warranty
-
Made in USA
If you have a pair of very expensive dressmaking shears that
you keep in a closed, lined box when not in use you’re probably going to have them sharpened
only by a very experience professional craftsman. For everything else in this category, the
ShearSharp is your sharpening tool of choice.
Click for detailed manufacturer’s instructions and diagrams.
The SturdyMount Sharpener
|
|
|
|
|
|
The AccuSharp SturdyMount
is very similar in function to the Knife & Tool
Sharpener except that it's mounted to a surface
such as boards, kitchen counters, filet boards,
workbenches, butcher blocks, or cleaning tables. It uses the same Diamond Honed Tungsten
Carbide Sharpening blades that are reversable to give you twice the working life of this too.
Replacement blades available.
It has a rugged ABS plastic body and stainless steel mounting
screws which are supplied (as is a drill bit for pilot holes for the screws). The SturdyMount is
suitable for use inside or outside.
Click for detailed manufacturer’s instructions and diagrams.
AccuSharp
Replacement Blades
|
|
These blades fit all of our
productsexcept
ShearSharp. We use only the finest
American Made carbide available, and Diamond Hone it to a mirror finish for the
best possible sharpening edge. The result is the finest line of carbide sharpeners
on the market today, at any price. These blades are reversible for double life and
most users report an average life of 5-10 years between replacements. Beware of
other brands that use cheap imported carbide! Insist on AccuSharp!
|
|
|
